Digital Infrared Photography
How to Shoot Infrared Landscape Photographs
Infrared film photography was primarily developed for military purposes, especially aerial reconnaissance, to expose enemy sites through the camouflage. It also has a function in forensic photography: to photograph evidence that is either not visible by the human eye or to visualise it by increasing the contrast between the evidence and the substrate. For example, blood stains on dark clothing (or cloth furniture or carpets), gunshot residue on clothing, and obliterated or altered writing on documents. However, this blog will discuss the creative side of infrared and how to use infrared with modern digital cameras for creative landscape photography.
Firstly, the primary question in understanding infrared photography is: what is infrared? Infrared isn’t light. Instead, it is a form of electromagnetic radiation outside the visual spectrum. The electromagnetic spectrum has many sources of energy across its continuum, including a range that we can see, which is classified as ‘visible light’ and is approximately between wavelengths of 400 to 700 nanometres (nm). This range includes all the rainbow colours that we see; however, if you want to simplify this concept into RGB values (red, green, blue), which is what we do in photography when using an additive colour synthesis model, then blue is considered as 400 nm, green around 550 nm and red 700 nm.
Infrared is outside the visual spectrum with the Latin word ‘infra’ meaning ‘below’ and ‘infrared’ meaning ‘below red’. Below, in this case, means a longer wavelength, but the important concept is that it is outside our vision, much like other electromagnetic energy like radio waves, microwaves, heat etc. Digital camera sensors are highly sensitive to infrared radiation, even more sensitive to infrared than the visual spectrum, especially the blue component of vis light. This spectral sensitive bias to infrared is highly problematic for camera manufacturers and when shooting normal scenes and expecting ‘natural’ colour images from your digital camera. Interestingly, film is the complete opposite sensitivity to digital sensors. Film is more sensitive to ultraviolet and blue and requires dyes to be added to the black and white emulsion to make it more sensitive to green and red and, with specialised films like infrared. Digital cameras are manufactured to prevent exposure to infrared radiation and record average scenes with normal colour reproduction. The camera design solution is relatively simple, but a situation we must be aware of when conducting this type of photography. An infrared blocking filter is fitted to the sensor to avoid any infrared exposure by the sensor.
To use digital cameras for infrared photography, the infrared blocking filter must be removed. It is not recommended that you attempt this yourself, and plenty of camera technicians can offer this service —use the professionals, and it isn’t expensive. Most photographers that shoot digital infrared have one of their older camera bodies converted because once it is converted to infrared, it becomes a specialised camera body. There are two methodological approaches to consider when converting a camera body to infrared. The first method is the simplest, which involves removing the infrared blocking filter and installing an infrared transmission directly onto the sensor.
The advantage of this method is you can use the camera normally and frame the image through the optical viewfinder. The disadvantage, which is only a slight disadvantage, is that your infrared work is limited to a single infrared transmission filter. There are now several options available for this type of filter, some for black and white work and while some are designed for colour infrared. The difference between an infrared blocking filter and a transmission filter is evident in the description. Infrared blocking filters allow visible light to transmit through while rejecting infrared wavelengths. Meanwhile, the infrared transmission filter transmits infrared wavelengths and rejects visible light. Some infrared transmission filters allow certain visible light wavelengths to transmit, which alters their optical characteristics. To understand the optical filters' characteristics, consult the filter manufacturer's filter transmission curves. The second infrared conversion option is to remove the infrared blocking filter and add either no other filter or a plain coverslip. Removing the infrared blocking filter makes the sensor sensitive to both infrared and the visible spectrum, although sensors are more sensitive to infrared. The control of the results in this method is determined by adding an infrared transmission filter to the camera lens. The obvious advantage of this method is that now there is a range of infrared optical filters to fit the optical system of choice. While a single transmission filter attached to the sensor works fine for most photographers, with the possible exception for forensic or scientific photography, specifically those targeting a specific material (like gunshot residue or blood in forensics). A significant disadvantage of this second method is when an infrared transmission filter that rejects all visible wavelengths is attached to the camera lens. Because we don’t see infrared, the viewfinder is black, and the live view option at the back of the camera is the only way to frame and focus the image. While the second method offers more flexibility, the first is far simpler to operate the camera.
It is important to note that just fitting an infrared transmission filter to your lens without the camera body conversion does not work. While the transmission filter will transmit infrared through the lens, the infrared blocking filter on the sensor will prevent it from recording anyway. Sometimes, there are small leaks of particular wavelengths that may result in a slightly different image; however, the infrared blocking filter must be removed to perform this type of work.
The final word on infrared landscape photography is: why shoot in infrared, and why is it different? For creative practice reasons, it is simply a matter of aesthetics; infrared results are quite different from normal visible light photography. All photography operates on contrast due to certain objects absorbing or reflecting light or infrared radiation in this form of photography. Why do plant foliage and green grass have a snow-like appearance in infrared photography? Because the foliage and grass, which vary depending on species and the plant's health, reflect a lot of infrared light and, therefore, record in a light tone. On the other hand, the trunks of trees and the blue sky absorb infrared light and produce a dark tone in the image. Another variant to consider is the amount of infrared radiation that is present at the scene. Direct sunlight produces a significant level of infrared, while cloudy conditions produce less. A word of caution though…..use this method subtly rather than the effect overpowering the image design and meaning. Happy shooting!
Written by Glenn Porter - Updated 24 July 2024
All images and text are copyrighted to Glenn Porter, all rights reserved. Top image ‘Witches Leap, Katoomba, 2016’; second image ‘Tree Plantation, Uki, 2022’; third image ‘Country Road, Shipley, 2017’; fourth image ‘Lake George II, Canberra, 2021’
